Hammes357 Posted October 29, 2021 Share Posted October 29, 2021 wanting to change the factory headlight bulbs to led. What's a good plug in play set to get? I seen some different topics on this but they was from a year or two ago so i was just checking with a new updated thread. And if anybody has a good set of brake pads they switched to so you don't have the factory squeaking that will drive you nuts, let me know. Link to comment Share on other sites More sharing options...
Steelslinger Posted October 30, 2021 Share Posted October 30, 2021 Beamtech H11 fanless. Should be about $35usd on amazon. Two sets, hi and low beams. Link to comment Share on other sites More sharing options...
Hammes357 Posted November 1, 2021 Author Share Posted November 1, 2021 thanks!!!! Link to comment Share on other sites More sharing options...
Bad Daddy Posted November 3, 2021 Share Posted November 3, 2021 Steelslinger, can you send me the link to the Beantech lights you purchased ? I show a few that are fabless, but not sure which ones will work- none of them say they’ll fit the 2020 Defender, lol. Thanks, BD Link to comment Share on other sites More sharing options...
Steelslinger Posted November 3, 2021 Share Posted November 3, 2021 None of them will say they fit Can-Am Defenders because its a niche market and the manufacturers don't list everything they will work on due to liability. But anything with H11 designation will work as that is an industry standard for bulb/connectors. https://www.amazon.com/BEAMTECH-Headlight-Fanless-Extremely-Conversion/dp/B072JC755L/ref=sr_1_1_sspa?dchild=1&keywords=beamtech+h11+led+headlight+bulb&qid=1635965628&sprefix=beamtech%2Caps%2C222&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyMzdIWlI3SUI5UEhFJmVuY3J5cHRlZElkPUEwOTc3ODU0MVUzV0ZaN1c4WlZKMCZlbmNyeXB0ZWRBZElkPUEwMzcwMDY5Mkw2NE9KV0ZTWkJSOSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= 1 Link to comment Share on other sites More sharing options...
Bad Daddy Posted November 15, 2021 Share Posted November 15, 2021 I got them and did the install. bought two sets, did low beams for now, will put on highs once I am satisfied there are no issues. I found them to move around a bit in the housing, likely due to the gasket size and the weight of the heat sink. Hopefully they are water tight! Thanks again for the link! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now