Jump to content

Tug Hill

Members
 View Profile  See their activity

  • Posts

    55

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Tug Hill

  1. Tug Hill
    Getting the Snowmobile Trails cleaned up today, GREAT to get out of the house!
  2. Tug Hill
    I'll have it a year in May, 2019 HD 10 Cab XT. The only issues were the windshield gasket was deformed and not sealing and Pass. window switch not working. I can't say a bad word about it at this point, just the best all-round machine I've ever owned!
  3. Tug Hill
    1120 miles to date on the HD 10 full cab XT, Just removed the tracks, greased suspension, cleaned out drive belt sheaves, changed out drive belt(Just because I was in there), changed oil and installed the wheels back on after a good cleaning. Ready for the season.
  4. Tug Hill
    Sandy, I just looked over the instructions from when I installed the LT 360's on my 19 XT 10 cab and can't find either of those references in them. Point out the page and i'll see if I can help. These were way ez'er to install than on my old Commander, which were a HUGE PIA. Those instructions just sucked, I ended up just getting it done by trial and error.
  5. Tug Hill
    The 19's don't look like that. No 12volt power post up in mine.
  6. Tug Hill
    Just an FYI for you all using cable or Syn. rope, change out those bolts on the side fairway rollers with Button head bolts. What happens is as you push on a pile, the rope will twist without weight on it and catch on the bolt head. Which will cut and break the rope just when you need it most. ......Don't ask how I know!
  7. Tug Hill
    Happy Thanksgiving everyone. I got the Apache LT tracks installed this morning on the HD10, also mounted the plow to check clearances. I will need to install cylinder stops on the angle cylinders and modify the plow dolly. It should be a blast running this beast this winter. Think Snow!
  8. Tug Hill
    That sucks, I had to wait for Western to release the mount setup for my 19" before I could buy it, but it fits and works well. What tires are on your machine? may look at something like that when I need to replace.
  9. Tug Hill

    Noise

    Tug Hill replied to Eric's topic in Defender Talk

    Nice, How many Sq Ft so far and the total amount and how thick is the material?
  10. Tug Hill
    Yea, that's not right. Take it back to the Stealer, that's on them.
  11. Tug Hill
    Get a Floor jack at least 1.5ton lift cap. if you need more height just add a block or two. Harbor Freight and NAPA run sales all the time. You can find them under $100 buck around this time of the year. Never trust a bottle jack to work on an UTV just not stabile enough.
  12. Tug Hill
    If you have the BRP part# look up the installation instructions here, https://instructions.brp.com/e-instruction.html#tab=1
  13. Tug Hill
    Tie in at the Cig. lighter outlet on the dash, unless your using the lighter to light up something. I put my 8" LED bar tied into that with no issues even with the LED Amber Strobe plugged in for plowing. The 8" draws less than 5amp max.
  14. Tug Hill
    That's why I went to a full hyd set up on mine. Just tip replace the 2 bolts on the new fairlead that hold in the side rollers with Button head bolts. what happened to my old one was the rope would loop and get caught on the bolt head when the plow would rise up on a pile and fall back down as soon as I backed up.
  15. Tug Hill
    Happed to me during the 1st ride, Battery terminals were lose. no issues since
  16. Tug Hill
    AHHU, just open up your socket set and find the one that fits. If you don't have a set that goes that big buy one you'll need it in the future.
  17. Tug Hill
    Your diagnosis plug is out of it's holder. It go's in next to the brake cylinders. Try not to get wet.
  18. Tug Hill
    Out in 19 XT Cab today and used the heater most of the ride.
  19. Tug Hill
    Thanks, can't wait to get tracks on an see what its going to look like. Just ordered the mounting kit for them from BRP. It's going to be a blast this winter,
  20. Tug Hill
  21. Tug Hill
    Got the Plow installed. Now just waiting for snow
  22. Tug Hill
    I happened to find the Heater Valve today while running the wiring for the new plow. You'll need to take out 3 Torx bolts from the bottom of heater section ( where the filters are) the valve is behind that plastic filter housing.
  23. Tug Hill
    We average about 260 inch's a year, with a good Lake Effect Event we could see 3 to 5 feet depending on how the wind is blowing over a day or two. Yea we get some snow. Also have a Kubota B3200 with a 60" front mounted snow blower to move the big stuff
  24. Tug Hill
    We get some SERIOUS snow up this way.
  25. Tug Hill
    I had the Alpine Flex on my old commander SXS and in three years went thru 2 cables and 2 Syn. Ropes. never again. I just ordered 6ft Westeren Impact fully Hyd. with the straight blade , time will tell I guess.
×
×
  • Create New...