Jump to content

Tug Hill

Members
 View Profile  See their activity

  • Posts

    55

  • Joined

  • Last visited

  • Days Won

    4

 Content Type 

Everything posted by Tug Hill

  1. Tug Hill
    Well done! and a nice write up. Please give and update on hoe the gear oil addition works out.
  2. Tug Hill
    Hi have a 6ft Western straight on my 19 HD10. I went with due to having tracks and V would be hitting the tracks. It still moves an impressive amount of snow...... Speaking of Snow I have to plow again in a couple of minutes
  3. Tug Hill
    Here's the &12.00 replacement switch from Spemco p/n VLD1G66B. There will be a plastic pin which need to get cut off. Other then that they wok great. I ordered 3 more this morning before i posted this!
  4. Tug Hill
    The bearings are sealed on LT bogie wheels.
  5. Tug Hill
    Coolant lines run under there
  6. Tug Hill
    19" HD10 and can do 100 miles with no problems. A coupled of stops and a walk about and it's all good.
  7. Tug Hill
    I think your confused, this is Can-Am Defender site(UTV's). not a Land Rover Defender forum.
  8. Tug Hill
    Give the folks at EPI a call and tell them what your planning. They'll get you set up correctly.
  9. Tug Hill
    Here ya go the parts on the floor are adapters and go on the frame, they just pin on. But they rattle without the mold board and pump installed.
  10. Tug Hill
    No, it mounts on the lower frame and the pump stays on the plow head/ frame when unhooked. Just the electrical plug on the front when not using plow.
  11. Tug Hill
    So their not as EZ to change out as they make it sound. It takes me about 3 hours to do a swap out, mostly because I'm working alone and I'm nuts about torqueing and alignment. Also how much mud? These things are heavy to say the least. I only run the Pre-filter on mine in DEEP snow with zero issues. Good luck with what ever you do.
  12. Tug Hill
    Just thinking a, Sled Deck type bed on the p/u and haul the camper. They have them that will load up a Defender.
  13. Tug Hill
    I use the OEM for the Maverick.
  14. Tug Hill
    They won't, I run mine fairly hard between plowing Lake Effect snow and working the woods it wears but never been torn up.
  15. Tug Hill
    I just ordered a EPI Sport kit for my HD10. they recommended it for the Tracks and the riding i do. Back ordered till the end of Apr. Also when doing the Spring inspection I found the belt worn about 0.10" and secondary clutch helix wearing on the roller edges so the whole thing will get changed out..... Hopefully before Turkey season up here.😊
  16. Tug Hill
    You'll be good, I ran 75 Miles this weekend in Snow/Dirt (SNIRT) and used about 3/4 of a tank.
  17. Tug Hill
    I plowed out a Well Drilling rig on one of my property's last year with the HD10 and LT's with over 3ft of lake effect snow and couldn't get it stuck if I tried. It was a about a1/2 mile of off-road/ no road bed just through a pasture up to the new home site.
  18. Tug Hill
    My 19' died into the first ride at about 20 miles. Both battery connections were lose, tightened up and zero problems since going on 1900 miles!
  19. Tug Hill
    Are you using a BRP belt or after market? Some after-market belt may not fit as well as the OEM. To season a belt, run the machine for 20 or so miles with slow starts and vary the speed don't Hammer it during the break-in. Check that the sheave's are clean and no grooves in them. If dirty clean with soap and water and light scrubbing with a Scotch-brite pad.
  20. Tug Hill
    I found Partzilla is about 10% to 20% lower on OEM parts and after a $ amount its Free shipping. Aftermarket I don't know, why would you need to mod these machines. It does' anything I task it with , Plowing snow, Track system, Hauling wood, broken down sleds-4wheelers, and a small car lost following Google maps..... They were A Dumb Ass! It just about the perfect ORV and I've owned a bunch of them.
  21. Tug Hill
    From past experience, always buy bigger then you think when it comes to trailers. Used to haul my snowmobiles and wheelers and never had enough room, be it gear or equipment. Boy i'm glad those days are over.
  22. Tug Hill
    Partszilla has them $15.15 Ea. Thanks again!
  23. Tug Hill
    Awesome, Thanks I'll hunt them down!
  24. Tug Hill
    I lost the same one?? I wonder?
  25. Tug Hill
    If anyone gets the part# please post it up, I need one as well. Thanks
×
×
  • Create New...