Stran01

I have a 2019 CanAm Defender and did as Andystoy19 said on Oct 28th 2019 and it worked just find for me. The only change would be that I had to use the "S" set/select button to change the delay to show my milege. 1) With vehicle in park, turn ignition key on but do not start the engine. 2) Select the vehicle total mileage using the Mode ( I used the "S" set/select button to change to mileage) button. 3) Press the Set button and hold while you switch the Hi and Low beam 3 times quickly. From the time the set button is pressed the hi and low beam activation must be complete in less than 5 seconds. 4) Release the set button and turn the key off. 5) Do not turn the key back on until the multifunction gauges turns off.