ChrisC

"There is a black plastic cap on that covers the terminals (one black terminal is negative or ground referred often as "-" and two red which are positive or Hot referred to as "+"). You will want to connect your ground wire from the switch, to the black wire terminal. The red wire will go to the opposite red wire on the block (both the black and red you want to hook to are the outside terminals on the block. The center one stays hot with the key on or off)" Great description.... I have a follow up question/problem. I had LED lights hooked to the two outside terminals and working fine for months. I recently added an amp and speakers. I hooked them up briefly and tested before permentaly installing the rocker switch and they worked fine. While installing the rocker switch in the dash I hit the neg/postive wire together and blew the f12 10A dc1/dc3 acc fuse that is located in the hood fuse box. I replaced it and now the previous working led quit working when hooked to the outside (+), it only works when hooked to the constant (middle)hot terminal(which i don't want). SO could it be my Led relay, I would think not as they work when hooked to the hot terminal. SO is there a bus bar relay, like in the fuse box under the hood? I have checked all the other fuses and they are good. So basically it like the outside + terminal does not work. 2019 Defender Max XT