Hammes357

good to know! thanks!

where did you order them from? i want to put them on front and back

Fuel tank valve yes! My 2020 is the same as the metallic sound I’m guessing the brake pads. I’m getting ready to change mine just looking for the right answer to this question. 

Anybody have a answer to this question? Getting ready to change mine out. I could take it apart and put it back together to find out but hey figured I’d ask.

3 hours ago, Andystoy19 said:

They should fit the rim no problem, I have the full fender flares and no problem, the odd time when you are turning sharply and are crossing deep ruts you may hear a very short rub but no sign or damage. Details are in this thread if you want to check it out.2019 DEFENDER XT HD 10 CAB LIFT AND 30" TIRES 🙂

are you talking about the stock rims that came on it that should work or like what djla was talking about with buying different rims so the same tire would fit front and back? because like he said above I'd have to buy 2 different set of tires for the stock rims. I couldn't open that link so that's why I'm  asking so many questions before i pull the trigger on buying tires.

dam it! nothing like looking at a side way picture!

6 minutes ago, DJLA said:

Are you sure,
 
https://www.denniskirk.com/bfgoodrich/14-front-rear-mud-terrain-t-a-km3-radial-tire.p654511.prd/654512.sku

Lol! I’m not that computer savvy to say the least. Are they just saying they won’t fit because there not the standard stock size?

7 minutes ago, DJLA said:

I’m not 100% sure, I don’t have fender flares on mine and any of the defenders I’ve installed fender flares on have had stock tires. 
If the fender flare doesn’t extend past the stock wheel well then I would guess they shouldn’t interfere with the tires, but I don’t want to give any miss information without actually having done it. 

well i guess dennis kirk dosn't offer these in a 30 so i guess ill stick with the 27's

2 minutes ago, DJLA said:

No, I have 30’s with no lift and there’s plenty of clearance

i should have mentioned i have fender flares also.Do you know if that will effect the 30's?

On 4/20/2022 at 8:51 AM, DJLA said:

I have KM3's on 2 vehicles (Raptor & CJ) and really like them, I would have put them on the defender but due to availability at the time I went with 30x10x14 maxxis liberty's, personally I prefer the 30" size, I haven't experienced any affects to performance, top speed, no low gear warnings coming up in the display, etc. Certainly Newtons second law of motion applies here but you're just not adding any considerable weight or rolling resistance, especially if your staying with the 27x11x14's

so if i went with the 30's would i have to lift it so they wouldn't rub?

Thought about trying a set of these out. Anybody have any input on these or know of something better?

Looking to put truck tires on my ride. Will they work on the stock rims or will I have to change a bunch of stuff up? Looking for recommendations for tires also.

thanks!!!!

wanting to change the factory headlight bulbs to led. What's a good plug in play set to get? I seen some different topics on this but they was from a year or two ago so i was just checking with a new updated thread. And if anybody has a good set of brake pads they switched to so you don't have the factory squeaking that will drive you nuts, let me know.

i bought a 2020 defender with a audio formz roof on it and found out while driving it in the rain between the roof and the roll cage its like Niagara falls coming into the cab. so when i took the roof lose i realized that there is no gasket between the two.So i took a chunk of pink panther foam hoping i could smash it down enough to get a good seal but that didn't work. Does can am make a roof gasket or does anybody have a good solution to solve this problem? and no I'm not using spray foam. and yes it has a windshield in it also.

Yes I did and installed it myself. Didn’t take long once I knew what I was looking for 

was going to change most of the zeyrks out to 90's or 45's so a guy could get the grease gun on them without fighting them or taking the tires off, but the standard 1/4 inch zerks i bought don't seem to want to screw in at all. Am i missing something here or are they some buy-motley zerk the local farm store doesn't sell??

Anybody have any experience with these doors? Just wondering if I want to take them off is there a trick to get them off the hinges or do I need to take the hinges off also? 

my defender has 2000 miles on it and when the steering wheel is centered we go left so i have to have it turned slightly to the right to go straight.and one of my front wheels is starting to chop real bad. so what's the easiest way to check the alignment on these machines without taking it to the shop?

looking at the winch there is no place to plug that remote in. the male plug in looks like it'd be just a simple plug and play hook up under the hood but like joe mentioned earlier they must have done away with the plug in under the hood? because there is no place where that plugs in under there unless I'm completely missing where the plug in is 

Thanks joe! Go figure there is no plug in these days! I will start looking at wireless now! 
Brett

Anybody know where the hard wired remote for the winch plugs into under the hood on a 2020 defender?