JTspartan2005

On 8/2/2021 at 1:31 PM, Steelslinger said:

The popular ones were GS Power ones for Jeeps. Most cut the roof corners to allow the bracket to be high enough to clear the windshield and wiper.

I went with a 50" straight lightbar and the GS brackets, but modified the brackets to keep the light below the roof and just back enough that the wiper arm doesn't hit it.

https://www.amazon.com/GS-Power-Windshield-Compatible-1984-2001/dp/B01DQMH1S2/ref=sr_1_5?dchild=1&keywords=gs+light+bar+brackets+jeep&qid=1627925546&sr=8-5

What mods did you have to do to the bracket? I just bought the 50" Rough Country Curved light bar, and have been looking for brackets that will work.

Has anyone seen a way to convert the back seat windows from the stock style to being able to roll them down similar to the fronts? It would be nice to be able to put them all the way down for the kids in the back!

On 3/26/2021 at 8:45 AM, Jay760 said:

Front sway bar will not work with the kit, but the Rear does. I was running the super atv front arms, and after 400 miles went to these. Would not have bought rhe super atv a arms, but needed to clear the 32" tires til the HCR kit came in for a trip nee years. Since we did the HCR kit, and Elka stage 4 shocks, haven't had time to take it out. will be doing that Easter weekend. I will tell you, bushings fit a lot better in the HCR Arm than the super atv ones. They were loose as hell in those arms. 

32" tires rubbed the top of the bed with the stock a arms, and the HCR gave it a 3" lift, hopefully eliminating that problem. 

How'd the Defender do with the HCR setup? Any issues without the front sway bar?

5 hours ago, Jay760 said:

Front sway bar will not work with the kit, but the Rear does. I was running the super atv front arms, and after 400 miles went to these. Would not have bought rhe super atv a arms, but needed to clear the 32" tires til the HCR kit came in for a trip nee years. Since we did the HCR kit, and Elka stage 4 shocks, haven't had time to take it out. will be doing that Easter weekend. I will tell you, bushings fit a lot better in the HCR Arm than the super atv ones. They were loose as hell in those arms. 

32" tires rubbed the top of the bed with the stock a arms, and the HCR gave it a 3" lift, hopefully eliminating that problem. 

I'll be interested how you like the ride, keep me updated! thanks.

Has anyone heard anything regarding AC issues with the 2021 Limiteds? I've seen a few comments, but not much detail on what the issues are?

How do you like the HCR arms? Any issues? I read that they do not accept the factory sway bars, how does it ride without them?

1 hour ago, A hunt 2 remember said:

Pretty sure the reason you can't find the kit is because they started putting the forward A-arms on 2020's and newer... I may be wrong, but I think you already have the clearance. You may need a slight lift... but I think you are good to go... If you were here in Oregon I'd let you try my 32's on for fittment...

Good luck,

Joe

Joe, 

I did find that Super ATV has a 2" forward A-arm kit for it, but no rear kit. Any issues in the rear with your 32's when the shocks are compressed?

I'm going to be picking up my 2021 Max Limited in a few weeks and wanted to put 32's on it. I've seen some of the a-arm kits that move the wheel forward to clear them, but not for the 2021 Limited. Has anyone been able to get 32's on they 2021? What kit, if any, did you use and could you post some pics?