Jump to content

Aggie1996

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Everything posted by Aggie1996

  1. Aggie1996
  2. Aggie1996
    thanks again for all the help
  3. Aggie1996
    I got it working, thanks for all the help. I’ll post some pics tomorrow.
  4. Aggie1996
    Got it. Like was advised earlier read the instructions!
  5. Aggie1996
    So I got it all done and I am hooked up to the bus bar under the plastic cap. Problem is the light in the lights work without turning the ignition. With the small light in the switch this won’t work. I assume I am getting power from the wrong spot?
  6. Aggie1996
    That is what I figured. The power cable on left in pic 2 has a fuse in it. I assume the orange goes to red and black to black? thanks again!
  7. Aggie1996
    I can’t thank you enough for the help. Nothing in line and instructions are awful. 1. First pic is cable from switch to light bar. 2. second pic are light bar power cables provided by can am 3. Third pic are wires coming off switch. Plug goes to cable in pic 1. The two loose wires are black and orange.
  8. Aggie1996
    Should say “can’t make”
  9. Aggie1996
    I have the 10” can am light bar and switch installed. Switch has an orange wire and black wire. I also have the light kit power cables. I can make heads or tails out of the instructions. Anyone wired this up before? It can’t be difficult.
×
×
  • Create New...